PVXP 15 Bt 15-Inch Powered Loudspeaker

The PVXp 15 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 15″ heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8″ AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the “soft-limiting” DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters, are accessed via a one-knob selector.

Features

Two-way bi-amped sound reinforcement enclosure

RX14 compression driver, with 1.4 inch titanium diaphragm

Reliable fan-cooled power amps with DSP protection

Total of 980W peak dynamic power

DSP control for precise crossover, EQ and limiting functions

Bluetooth input is via a dedicated input channel

Mix/Thru Output is via a male XLR jack

Durable plastic injection-molded trapezoidal enclosure

Extra angled section on right side allows floor monitor use

Pole mount molded-in for 1 3/8″ diameter poles

Top, bottom and right side flying point inserts

15″ heavy-duty woofer with 2 3/8″ voice coil & 50 oz. magnet

Full-coverage heavy-duty perforated steel grilles, with powder coat finish

DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision

Peavey's Quadratic Throat Waveguide technology, 100 by 50 degree coverage

Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads

Analog input is via a combo female XLR and 1/4″ TRS phone jack with balanced input

Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8″ jack

Each channel has a level control and a 3-band EQ section to adjust and shape the input signals

Packed Weight: 57.11 lb (25.9 kg)

Packed Length: 31.625″ (80.33 cm)

Packed Width: 21.625″ (54.93 cm)

Packed Height: 20.375″ (51.75 cm)

What’s in the box
1 x PVXP 15″ DSP