Quechua Men’s Waterproof Hiking Shoes – mh500 Blue – UK 8.5

We designed this waterproof shoe for those of you who hike regularly. Take to the mountain trails with your feet fully protected and comfortable

Benefits
Anatomic design
– The suede leather on the forefoot will adapt to your foot shape over time

Lightweight
– 445g per shoe in size 43

Abrasion resistance
– Rubber stone guard at the front and plastic at the back of the foot

Traction
– 5mm studs shaped for strong traction. Rubber sole with very good grip

Cushioning
– Thick eva foam midsole: comfort/protection from the ground

Waterproof
– Waterproof and breathable membrane lining: your feet dry for 6hr in all weather

Foot support
– Weblock on the last 2 lace loops to hold the midfoot and heel in place

Technical information:
What is your hiking frequency and intensity?
We have classified our products in terms of performance and features for 3 levels of mountain walking:
– Occasional: around ten hikes per year of about 3 to 4 hours’ duration, less than 10km and less than 700m of elevation gain.
– Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing.
– Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.

Sole: outdoor contact
New high-performance sole with our new exclusive rubber blend developed by our experts. More grippy, more resistant. The sole is designed for better grip using 3d simulations and then laboratory tested to assess the coefficient of grip on different surfaces and conditions.

Waterproofing test
In a laboratory, the boot is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry.

Then we confirm in the field or under the rain, that the shoe meets its promises.

Extending waterproof performance
To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in.

We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.

Which size should i select?
Some decathlon stores have a test route.

1.Try on both shoes, standing up, with the socks worn for hiking.
2. Tighten the laces, taking care to correctly balance the tightening.

Check two points:
– The heel does not come up before the boot when you walk uphill.
– The foot does not slide and the toes do not press against the front when going downhill.

Try on several sizes and models.
Break them in gradually to adapt them to your foot.

How do you avoid blisters?
Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following: – choose a shoe in your size.

Wear suitable socks
Tie and tighten your shoes properly.
Make sure you tighten or loosen your laces accordingly while wearing your shoes, especially before starting a climb or a descent.
Wear your shoes on a short trip for the first use.

Which socks ?
A waterproof shoe will be less breathable than a non-waterproof shoe. Mid-length socks like the mh500, mh520 and mh900 are therefore preferable for absorbing perspiration and reducing overheating.

Optimise your boot’s capacities: replace your insoles.
The original insole in your boots is designed to accommodate most feet. A change of insole can bring:

Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning.
Longer life: restore the support and comfort of your shoes by replacing the insole each season.

How should you look after your boots?
– leave to air dry.
– Remove dry mud with a stiff brush.
– Clean marks using a brush and some warm water
– Leave to dry
– Spray with a re-waterproofing product to restore the water-resistance to the upper.

Composition
– Upper of: 20.0% polyamide, 40.0% leather – bovine – split, 40.0% polyester; lining and sock of: 100.0% polyester; outer sole of: 60.0% synthetic rubber, 40.0% ethylene vinyl acetate

Tips for storage and maintenance
Storage tips
– Store in a well-ventilated dark, dry place.

Restrictions on use
– Do not use as personal protective equipment.

What’s in the box
1 x Quechua Men’s waterproof hiking shoes – mh500 blue