Quechua Women’s Waterproof Mountain Boots – Khaki – UK 6.5

The waterproof shoe made for occasional mountain walking, designed at the foot of the Mont Blanc!

Lightweight
395 g per boot in size 6

Robustness
Durable rubber toe bumper at the front of the foot to protect your toes.

Traction
Non-slip rubber outsole with 4mm gripping studs.

Cushioning
Full-length cushioning thanks to an EVA midsole

Waterproof
Waterproof and breathable membrane lining: your feet dry for 3h in all weather

Foot support
High-top upper. Locking hooks to spread lacing between the foot and

We have classified our products in terms of performance and features for 3 levels of Mountain Walking:

occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10km and less than 700m in elevation gain.
Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing.
Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.

The grip of our soles is certified.

To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (Smooth, Rugged, Dry, Wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over 500 km

Waterproofing test
In a laboratory, the boot is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry.

Then we confirm in the field or under the rain, that the shoe meets its promises.

Making waterproofing last longer
To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in.

We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our Decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.

Which size should I select?
The most important thing is to try on several sizes and styles of boots to find the one most suited to you!

You can take a size above your usual one to prevent the toes from bumping into the toe box when going downhill, provided the foot is properly supported to avoid friction.

Tip: keep your toenails short and, before a long descent, check that your lacing is tight enough to prevent your foot from sliding forwards inside the boot.

Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following: – Choose a shoe in your size.

Wear suitable socks
Tie and tighten your shoes properly.
Make sure you tighten or loosen your laces accordingly while wearing your shoes, especially before starting a climb or a descent.
Wear your shoes on a short trip for the first use.

Some Decathlon stores have a test route.

Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening.
Check two points:

the heel does not come up before the boot when you walk uphill.
the foot does not slide and the toes do not press against the front when going downhill.

Try on several sizes and models.

Break them in gradually to adapt them to your foot.

Which socks?
A waterproof shoe will be less breathable than a non-waterproof shoe. Socks like the MH500, MH520 and MH900 with a high or medium upper (adapted to the height of the boot) are therefore preferable for wicking away perspiration and reducing friction.

Optimise the capabilities of your boots: replace your insoles!
The original insole in your boots is designed to accommodate most feet. A change of insole can bring:

Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning.
Longer life: restore the support and comfort of your shoes by replacing the insole each season.

Lab tests
Further laboratory tests were conducted to test the following elements: attachment of eyelets and webbing, assembly, toxicology, UV resistance, sole and upper component abrasion, accelerated ageing.

How should you look after your boots?
– Leave to air dry.

Remove dry mud with a stiff brush.
Clean marks using a brush and some warm water
Leave to dry
Spray with a re-waterproofing product to restore the water-resistance to the upper.

composition
Outer sole of: 70.0% Synthetic Rubber, 30.0% Ethylene Vinyl Acetate; Upper of: 17.5% Polyurethane, 68.1% Polyester, 14.4% Leather – Bovine – Split; Lining and sock of: 10.0% Polyamide, 90.0% Polyester

Tips for storage and maintenance
Storage tips
Store in a well-ventilated dark, dry place.

Restrictions on use
Do not use as Personal Protective Equipment.

Warranty
2 Years

What’s in the box
1 x Quechua Women’s waterproof mountain walking boots – Khaki