Rubio Monocoat Pre-Aging – 1L – Authentic #4

Non-reactive pre-treatment to give new wood an old look.

A new floor with an old look. It is a floor trend that is currently very popular. In addition to actually smoking and fuming wood, there are many reactive products that will give the wood a smoked or aged look.

Rubio Monocoat Pre-Aging is a high-quality, non-reactive pre-treatment, available in 10 standard shades. The colour spectrum ranges from a lighter to a darker smoked look, with colours that can be mixed with each other to the variant the customer wants. This results in a deep colour with subtle accents.

Non-reactive water-based pre-treatment
Stable colour that is easy to reproduce
Excellent stain resistance after treatment with our oil
Deep colouring with subtle accents
Applicable to virtually all wood types
Neutral product
Does not affect the quality of the finishing coat
Minimal odour
Free of transport restrictions
Also colours the hard parts of the wood and the sapwood
No overlaps

Instructions for use for furniture, stairs & worktops:

STEP 1. Sand the surface scratch-free. Finish with screening net 100 to 150, the colour intensity depends on the sanding method used.
When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
STEP 2. Vacuum the surface thoroughly.
STEP 3. Shake the Rubio Monocoat Pre-Aging well before use and pour in a bucket (Rubio Monocoat Bucket). STEP 4. Apply the product evenly and in a saturated manner on the to be treated surface with a Rubio Monocoat tool, such as a Microfiber Pad, Brush, Sponge, spray gun or roller.
Tip: For edges/corners: apply with brush (Rubio Monocoat Brush) or a green Rubio Monocoat Mouse Pad. STEP 5. Smooth out with a beige Rubio Monocoat Scrubby Pad. Avoid puddle formation.
STEP 6. Allow to dry for about 24 hours and ensure sufficient ventilation. The exact drying time depends on the foundation, air humidity, temperature and ventilation.
Tip: It is perfectly normal for the surface to dry in ‘spots’ that follow the grain pattern. As long as the surface still looks ‘spotted’, it is not dry yet.
STEP 7. After drying, break the raised wood fibers with a red Scrubby Pad and vacuum afterwards.
STEP 8. Now apply the Rubio Monocoat Oil Plus 2C.
Please consult the technical data sheet of the oil for a correct application.

Instructions for use for floors:

STEP 1. Sand the surface scratch-free. Finish with screening net 100, the colour intensity depends on the sanding method used.
When renovating, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
STEP 2. Vacuum the floor thoroughly.
STEP 3. Shake the Rubio Monocoat Pre-Aging well before use and pour in a bucket (Rubio Monocoat Bucket).
STEP 4. Apply the product in a saturated manner with a Rubio Monocoat Microfiber Pad. Work in areas of 90 cm. Afterwards smooth out the area again with the same Microfiber Pad. Make sure that this pad is thoroughly wrung out. Avoid puddle formation.
Tip: For edges/corners: apply with brush (Rubio Monocoat Brush) or a green Rubio Monocoat Mouse Pad.
STEP 5. Allow to dry for about 24 hours and ensure sufficient ventilation. The exact drying time depends on the foundation, air humidity, temperature and ventilation.
Tip: It is perfectly normal for the surface to dry in ‘spots’ that follow the grain pattern. As long as the surface still looks ‘spotted’, it is not dry yet.
STEP 6. After drying, break the raised wood fibres with a floor polisher equipped with a red Rubio Monocoat Pad and vacuum afterwards.
STEP 7. Now apply the Rubio Monocoat Oil Plus 2C. Please consult the technical data sheet of the oil for a correct application.

Instructions for use for Industrial application:
If you want to apply this product in an industrial manner, we advise you to get in contact with our technical service team.

What’s in the box
1 x 1L Pre-Aging – selected variant