Rubio Monocoat Universal Maintenance Oil – 500ml

Universal Maintenance Oil is a maintenance oil for refreshing wood treated with Rubio Monocoat oil, as well as for maintaining surfaces not treated with Rubio Monocoat. The oil is extremely suitable for ‘high traffic’ areas that require regular protection (e.g. public areas, offices, restaurants, hotels, etc.).

Universal use
Provides a renewed protection
Restores the luster
0% VOC

Instructions:

Furniture, stairs & worktops:

Step 1. Make the surface free of dirt and dust.
Step 2. Spray Surface Care on the surface.
Step 3. Clean the surface with a mop or Microfiber Pad.
Step 4. Let the surface dry ( 15 minutes). Careful: do not leave water on the surface, it is sufficient to clean damp. Do not walk on the surface until it is completely dry.
Step 5. Take the Universal Maintenance Oil and stir thoroughly until a homogeneous mixture is obtained.
Step 6. Apply a small amount of oil with a brush and afterwards spread out with a beige or red Scrubby pad or a hand sander with a small beige or red 5.9 inch pad (you can also use the Mouse Pad for smaller objects and corners). Preferably work in areas of 2 to 4 m (areas which you can finish within 15 minutes, including the next step).
Step 7. Allow to absorb for a few minutes and then wipe away all the excess oil with a cloth or a hand sander with a small white 5.9 inch pad. Each treated area should be wiped dry within 15 minutes and should not feel sticky anymore.

Floors:

Step 1. Make the floor free of dirt and dust.
Step 2. Pour a maximum of 50 to 100 ml of Universal Soap in a bucket with 10 liters of water.
Step 3. Clean the surface with a mop or Microfiber Pad.
Tip: The best working method is with two buckets: one with the soap mixture and one with clean water to rinse the dirt out of the mop.
Step 4. Rinse with clean water. Careful: do not leave water on the surface, it is sufficient to clean damp.
Step 5. Allow to dry for 15 minutes. Do not walk on the floor until it is completely dry.
Step 6. Take the Universal Maintenance Oil and stir thoroughly until a homogeneous mixture is obtained
Step 7. Work in areas of 5 to 10 m . Start each area by treating the edges with a beige or red Scrubby pad. Then apply a small amount of Universal Maintenance Oil every 0.5 meters with a brush. Spread in the direction of the wood with a polisher with a beige or red 16 inch pad.
Step 8. Wipe away all the excess oil with a cloth or a polisher with a white 16 inch pad.
Step 9. After you have finished all the areas, go over them again with a new white pad. The surface should not feel sticky anymore.

What’s in the box
1 x 500ml Universal Maintenance Oil – Pure