Saramonic Blink500 ProX Q5 2.4GHz Dual-Channel Wireless Microphone System

The Saramonic Blink500 ProX Q5 (TXQ+RXUC) is a new 2.4Ghz dual-channel wireless microphone system with one transmitter and the RXUC dual receiver, which features a USB-C output, designed to be compatible with most USB-C devices.

Blink500 ProX Q, the simplified and the smallest version of the Blink500 ProX, makes video recording easier through the remarkable sound collection and smaller and lightweight look and design. Ideal for broadcasters, podcasters, vloggers, livestreamers, YouTube creators and filmmakers.

Remarkable sound, portable size
To achieve the best possible recording sound, Saramonic has fitted the Blink500 ProX Q with a built-in omnidirectional microphone with an impressive sensitivity of -39dB, 48KHz sampling rate and 20-20KHz frequency response. A 6-stage gain control allows you to adjust the audio gain with ease. Giving you professional dynamic sound quality on a transmitter small and light enough that you can easily clip it to a shirt or collar.

2.4GHz powerful wireless transmission
The new chip and the2.4GHz frequency-hopping technology makes Blink500 ProX Q just as powerful as it is portable. Whether you’re an amateur or a professional, it has the power to help you record incredible crystal-clear sound with 8ms ultra-low latency and at distances of up to 100 meters for extremely stable operation even in areas with high RF activity.

For Android phones and tablets, and other USB-C devices
The Blink 500 ProX RXUC dual-channel receiver plugs right in and mounts to a device’s USB-C port, allowing the system to work perfectly with your Android smartphone or tablet, or PC/laptop, adding hardly any additional weight or bulk to your device. A 3.5mm headphone output lets you monitor the sound in real-time, even if your app does not allow real-time monitoring. Absolutely vital to ensure you’re getting the best sound when recording, and finally allowing you to hear the other participants in virtual meetings and video call apps in real-time. The RXUC also features a much-desired selectable Mono/Stereo output setting, giving you the ability either record each mic to separate channels, or mix the mics into your device’s video or audio recording app.

Ideal toll for content creators
The Blink500 ProX Q is ready to handle a whole day of recording: the Blink500 ProX Q transmitter can run for 6 hours. The RXUC is powered by the USB-C device into which it is plugged.

RXUC receiver comes with USB Type-C connector
Compatible with Android phones & tablets, PC, laptop and other USB_C
Built-in omni mic and fur windscreen
Up to 100m range and 8ms ultra-low latency
Selectable stereo or mono output modes
Bigger vivid OLED screen on RX for vital info
Up to 6 level gain control for tailored output
Real-time monitoring
Up to 6h (TXQ) recording
USB-C charging port (DC 5V)

Specifications:

Blink500 ProX RXUC
Transmission Type: 2.4GHz Digital Frequency
Modulation: Digital Modulation
Operating Range (without obstacles): Up to 100m
Audio Output: USB-C Connector
Monitor Output: 3.5mm (TRS/TRRS) Headphones Output
Power Requirements: Supplied by USB-C Devices
Antenna: Built-in Antenna
Weight: Approx. 15.5g
Dimensions: 82 x 22 x 12mm
Operating Temperature: 0 C to 50 C
Storage Temperature: -10 C to 50 C

Blink500 ProX TXQ
Transmission Type: 2.4GHz Digital Frequency
Modulation: Digital Modulation
Polar Pattern: Omnidirectional
Operating Range (without obstacles): Up to 100m
RF Output Power: <10mW
Distortion: 0.1%
Frequency Response: 20Hz-20kHz
Reference Audio Input Level: -20~-42dBu (MIC input, 0dB gain)
Signal-to-Noise Ratio: >84dB
Audio Input: Built-in Microphone
Battery Specifications: 3.7V/150mAh
Power Requirements: Built-in Li-ion Battery / USB-C DC 5V
Built-in Battery Life: Approx. 6 hours
Antenna: Built-in Antenna
Weight: Approx.16.5g
Dimensions: 44.5 x 30.5 x 12mm
Operating Temperature: 0 C to 50 C
Storage Temperature: -10 C to 50 C

What’s in the box
1 x Blink500 ProX RXUC receiver
1 x Blink500 ProX TXQ transmitter
1 x Fur windscreen
1 x Type-C Charging Cable
1 x Pairing pin
1 x Carrying case