Seakoo 0.50HP Automatic Water Booster Pump

Application:
Clean water without abrasive particles / Non-aggressive liquid.
In particular for delivering water in combination with small
pressure sets and for irrigation.
Pump switch on/off automatically with controller and controller will also switch off when no water is detected.
Enough flow and pressure for one shower or one sprinkler on hosepipe.
Installed in enclosed places, or at least protected against
inclement weather.

Motor:
2 pole induction motor.
Single phase 220V, 50/60Hz.
Insulation: Class B/Class F.
Protection: IP44.
With capacitor and thermal overload protector.

Material:
Pump body: Cast Iron.
Motor support: Aluminum.
Impeller: Brass.
Motor shaft: Stainless Steel or CS45#.
Mechanical seal: Ceramic-Graphite.
100% copper winding.

Operating Conditions:
Max pressure: 32m (3.2bar)
Max flow: 1800litres/hour (1.8m3/h)
Suction lift up to 8m.
Liquid temperature up to +40?.
Ambient temperature up to +40?.
Max. working pressure: 6 ba

What’s in the box
1 X Pump with Controller