Smart Power Trolley 1.5KVA (1000W) Pure Sine Inverter/UPS/Charger/Solar – Excluding Batteries

The Smart Power System (SPS) does not require an electrician and simply plugs into a standard wall socket.
It is designed to work inside your home or business providing electricity if the power goes off.
If the electricity fails the SPS takes over instantly, providing uninterrupted power to your electronics.

This SPS-1000 purchase excludes batteries.
The SPS-1000 is a 24V machine and needs TWO 12V batteries wired in series.
The battery compartment accommodates two 100Ah batteries.
Battery installation is straightforward with all instructions and cables supplied.
You can fit most types of deep cycle battery, eg. Lithium iron phosphate (lead acid replacements) or Lead acid based batteries eg. GEL, AGM

The SPS-1000 has a built-in solar controller for optional solar connection.
A solar panel IS NOT REQUIRED to run the SPS but can be added at any time.
Solar panel and batteries are not included.

DESIGN FEATURES:
– Simple operation
– Fully automatic
– Uninterrupted power (UPS)
– All-in-one cabinet
– Rated Power 1000W Pure Sine Wave output
– Intelligent CPU control
– Solar charge controller
– Automatic Voltage Regulation
– LCD Information display: battery charge, input/output voltage
– Low battery/overload warning
– Peak Surge: 2000W
– On wheels
– No exposed wiring
– Lockable battery compartment
– Fan cooling

The SPS-1000 is a 24V machine and needs TWO 12V deep cycle batteries wired in series.
The battery compartment accommodates two 100Ah batteries.
Battery installation is straightforward with all instructions and cables supplied.
You can fit most types of deep cycle battery, eg. Lithium iron phosphate (lead acid replacements) or Lead acid based batteries eg. GEL, AGM

AC MODE:
– Input Voltage: 145-275VAC
– Input Frequency: 50Hz
– Output Voltage: 220VAC
– Short Circuit: Breaker

INVERTER MODE:
– Output Voltage: 220VAC plus minus 5%
– Output Frequency: 50 plus minus 1%Hz (auto detection)
– Output Wave Form: Pure Sine Wave

OTHER:
– LCD Display: Voltage input/output. Battery status. Overload
– Dimensions: 45cm x 45cm x 40cm
– Operating Environment: 0 C – 40 C. Humidity 20% – 90% non-condensing
– Noise Level: Less than 40db (1m)
– Weight (Excluding Battery): 30Kg

What’s in the box
1 x SPS 1000 Smart Power Trolley
1 x AC Power Lead
1 x Wheels
1 x Instruction Manual