Stmicroelectronics (STM32F303CCT6) ARM MCU, General Purpose, 32 bit

ARM MCU, General Purpose, STM32 Family STM32F3 Series Microcontrollers, ARM Cortex-M4, 32 bit

Product Overview
ARM-based Cortex-M4 32bit MCU + FPU single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit). Supports CAN interface (2.0B Active), Two I2C fast mode plus (1Mbit/s) with 20mA current sink, SMBus/PMBus, wakeup from STOP, up to five USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control), up to three SPIs, two with multiplexed half/full duplex I2S interface, 4 to 16 programmable bit frames, USB 2.0 full speed interface, infrared transmitter communication interfaces.

Routine booster: 8Kbytes of SRAM on instruction and data bus with HW parity check (CCM)
Reset and supply management (power-on/power-down reset, programmable voltage detector)
low power modes: sleep, stop and standby
Clock management (internal 8MHz RC with x 16 PLL option, internal 40KHz oscillator)
Up to 87 fast I/Os, interconnect matrix, 12channel DMA controller
Two 12bit DAC and 7 fast rail to rail analogue comparators
Up to 24 capacitive sensing channels supporting touch key, linear and rotary touch sensors
Up to 13 timers and 96bit unique ID
Calendar RTC with alarm, periodic wakeup from stop/standby
Serial wire debug, Cortex-M4 with FPU ETM, JTAG

Product Information

Product Range: STM32 Family STM32F3 Series Microcontrollers
Device Core: ARM Cortex-M4
No. of Bits: 32bit
Data Bus Width: 32bit
Operating Frequency Max: 72MHz
CPU Speed: 72MHz
Program Memory Size: 256KB
RAM Memory Size: 40KB
IC Case / Package: LQFP
No. of Pins: 48Pins
MCU Case Style: LQFP
No. of I/O’s: 20I/O’s
Interfaces: CAN, I2C, SPI, USART, USB
Embedded Interface Type: CAN, I2C, SPI, USART, USB
Supply Voltage Min: 2V
Supply Voltage Max: 3.6V
MCU Family: STM32
MCU Series: STM32F3
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
MSL: MSL 3 – 168 hours

What’s in the box
1 x Arm Microcontroller