Strike-Arc Plasma Cutter 10mm Capacity

The Air Plasma Cutter can be used for a wide range of cutting applications: stainless steel, alloy steel, copper, aluminium and all other color metal materials. You will need a suitable compressor to operate the CUT 40 Air Plasma Cutter. Clean dry air supply is required: 350KPA/3.5 BAR – 550KPA/5.5BAR, to the machine. Air pressure must be regulated lower or higher depending on cutting requirements and adjustment the

required amperage.

CUT-40 Plasma Cutter – DC Inverter includes the following:

– Face Shield. 

– Earth Clamp & Cable / Cutting Torch. 

– Water Trap. 

– Hose & securing clamps. 

– User Manual. 

– 1 Year warranty. 

Features:

– The cutter can be used for many applications in various industries. 

– It is very light and portable weighing at only 7.5 kg. 

– Can cut circles, ovals and many other shapes/ free hand or the use of jigs. 

– Cutting capacity increased 1.8 times higher in cutting speed compared with oxy fuel cutters. 

– Rate input power 4.9kVa.

– No-load voltage 240V.

– Rate output cur 10-40 Amps.

– Rate output voltage 96V.

– Duty cycle 60%.

– Cut thickness 10mm.

– Weight 7.5kg.