Sunix DPSS02H00 Ethernet Enabled 2-port RS-232 Port Replicator

DPSS02H00 allows users to expand two RS-232 ports over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/0 Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, Device Sharing, and Ethernet-COM port hot-plug capability; user can expand RS-232 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.

Features:

Expands 2 independent RS-232 serial ports over Ethernet networking.
Built-in with SUNIX DevicePortR DPL20000 Hiah-Performance Ethernet-UART controller.
SUNIX DevicePort proprietary Ethernet I/0 Redirection Technology.
Serial communication with real time data transmit and receive.
Physical COM port accessible via Windows Device Manager.
Up to 255 COM ports can be setup on a windows system simultaneously.
Accessing Legacy COM port by using existing software and application.
Flexible port configuration with DevicePort on/offline smart COM deployment.
Auto connection and mapping with MAC address bound.
Keeps physical COM port in system when DevicePort under off-line mode.
Serial signal staging until DevicePort recovery back to online mode.
Device Sharing allows connected peripherals to switch between multiple hosts at ease.
Built-in dual 10/100 Ethernet ports for Ethernet cascading capability.
Low power consumption design of 2.5W for meeting Green Environmental movement.
15KV ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
CE, FCC, VCCI, C-Tick, BSMI and RoHS certified, with Microsoft WHQL approval.

Serial Communication
– Interface: RS-232
– Controller: SUNIX DPL2000Q
– BUS: Ethernet
– No. Of Port: 2-port
– FIFO: 1K byte Hardware / per port
– Signal: DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
– Protection: +15KV ESD IEC6000-4-2 Air Discharge, +8KV ESDIEC61000-4-2 Contact Discharge, ‡4KV ESDIEC61000-4-2 Level2 Line-to-Line
– Boud rate: 50bps ~115.2Kbps
– Stop bit: 1,1.5,2
– Parity: Even, odd, none, mark, space
– Flow Control: Xon/Xoff (software)
– Connector: DB9 Male

Ethernet Communication:
– Number of Ports: 2-port, Ethernet Switch Port
– Speed: 10/100 Mbps, auto MDI/MDIX
– Connector: RJ45
– Magnetic Isolation Protection: 1.0K Built-in

Power Requirements
– Input Voltage: 5 to 12VDC
– Power Consumption: 2.5Q @ 5VDC
– Connector: DC-Jack

Driver Support
– Windows Client: XP (X86) / 7 / 8 / 8.1 / 10 (X86/X64)
– Windows Server: 2003 / 2008 / 2012R2 (X64)

Regulatory Approvals
Hardware
– EUR: CE EN55022 Class B, EN55024
– US: FCC Part 15 Class B
– TAIWAN: BSMI: CNS13438
– AS/NZS: C-Tick: CISPR22 AS/NZS
– JAPAN: VCCI

Software
– Microsoft WHQL Windows
– Microsoft Client: XP (X86) / 7 / 8 / 8.1 / 10 (X86/X64)
– Microsoft Server: 2003/2008/2012R2 (X64)

Environment
– Operation Temperature: 0 to 45 C (32 to 113 F)
– Operation Humidity: 5 to 95% RH (non-condensing)
– Storage Temperature: -20 to 85 C (-4 to 186 F)

Physical Characteristics
– Housing: ABS, PC, Metal
– Weight: 145g
– Dimensions: 121×81.93x27mm, 4.7×3.2×1.0 inches

What’s in the box
1 x Sunix DPSS02H00 Ethernet Enabled 2-port RS-232 Port Replicator