Tenda 18 Port with 16 PoE 135W 1 SFP/Gigabit Combo Switch TEF1118P-16-150W

Tenda’s TEF1118P is a 18 x Port 10/100Mbps Gigabit switch with 16 x 802.3af/at PoE ports and 1 x Gigabit / SFP Combo uplink port.

The switch offers a maximum PoE power budget of 135W , up to 30W per port.
This can supply power to and exchange data with AP’s, IP cameras together with IP phones supporting the 802.3af/at standard.
It also provides simple management modes such as CCTV (QOS on ports 1-8), VLAN (Port Isolation) and Extender mode (250m PoE at 10mbps).
The switch also provides 6KV lightning protection.

Key Features:

16 10/100 Mbps Base-TX RJ45 port; 1 10/100/1000 Mbps Base-T RJ45 port; 1 100/1000Base-X SFP port

Ports 1-16: IEEE 802.3af/at PoE ports; maximum power output of each PoE port: 30 W; maximum power output of the switch: 135 W

13-inch desktop size, 1U height, rack mountable

Hardware DIP switch for selection among the CCTV, Standard, VLAN, and Extend modes.
The Extend mode features 1-8 port transmission distance of up to 250m at 10 Mbps.Hardware
DIP switch to isolate ports to prevent broadcast storm and defend against DHCP spoofing.

Ethernet Ports: 16x 10/100 ; 1x 10/100/1000
Hardware Button: CCTV, VLAN, Standard, PoE Extender
Interfaces: 18
Max. Power Consumption: 15W
Mounting: Desktop or Rack-Mount
Operating System: None
Operating Temperature: 0 to 40 Degrees Celsius
PoE Input: None
PoE Output: 802.3af/at on Ports 1~16
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: 1x 1.25Gbps
Supported Voltage Range: 100V-240V

Dimensions: 294 x 178 x 44mm

What’s in the box
1 x Tenda 18 Port with 16 PoE 135W 1 SFP/Gigabit Combo Switch TEF1118P-16-150W