Tenda B6 5Ghz 11n PtP 300mbps Base Station

B6 / CPE&Basestation / 5GHz 11n 300Mbps Basestation

What it does

B6 5GHz 11n 300Mbps Basestation is designed for PtP and PtMP solutions for rural wireless connectivity and CCTV surveillance.

Features with two RP- SMA enables it to pair with dish antenna or sector antenna to establish PtP backhaul connection and P2MP link.

It adopts Tenda TDMA (Time Division Multiple Access) proprietary protocols–TD-MAX to improve performance and capacity. The auto-bridging technology enables it easy to set up for both business and home users.

Multiple Application Scenarios
P2MP Link
Pair with Sector antenna, B6 work as AP mode to deliver wireless signal to share Internet to local resident, small office.

Super Channel-Extended Frequency
B6 adopts of Qualcomm AR9344 chipset and special software mechanism optimization for radio driven architecture to offer extended frequency support. This feature is designed to help users get out of the congested, unlicensed 5GHz band and into a clean spectrum.

TD-MAX-TendaTDMA proprietary protocol
TD-MAX is Tenda TDMA (Time Division Multiple Access) proprietary protocols to improve performance and capacity for wireless WISP outdoor application scenarios. In an outdoor environment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometres. the CPE can’t sense each other, they become“hidden nodes” and cannot coordinate access to the wireless channel. Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput. With TD-MAX, it coordinates all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocols.

10/20/30/40MHz Channel Bandwidth for better throughput
B6 applies special optimization in software for register parameters to deliver 10/20/30/40MHz channel bandwidth option. It provides an extra 10MHz and 30MHz channel bandwidth options to be consumed according to applycation scenarios. When you choose the 30MHz channel bandwidth option, it can increase throughput for noisy environments. When you choose the 10MHz channel bandwidth option, it can increase the number of available, non-overlapping channels, so networks can scale better.

Channel shift to avoid interference
B6 provides a Channel Shift feature to offset the central frequency 5MHz upper. It can avoid interference from nearby AP and deliver higher throughput.

CPE Assistant-Centralized Management Platform
B6 equips with centralized management software that helps users easily manage all the devices in their network from a single PC – CPE Assistant. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using CPE Assistant.

Professional Outdoor Design
B6 adopt of IP65 weatherproof and 6000V Lightning protection design, It can withstand harsh environmental conditions such as sunshine, rainfall or an extremely low/high-temperature environment.

Dimension194.78342.1mm
DeploymentPole Mount
Application ScenariosPtP, PtMP for rural wireless connectivity and CCTV surveillance
Frequency Range5GHz
Standard&ProtocolIEEE 802.11a/n
Private TDMA ProtocolTD-MAX
Maximum wireless speed300Mbps
Interface110/100Mbps Ethernet Port
Antenna2RP-SMA
Reset Button1
GND1
Power Consumption8.5W
Waterproof LevelIP65
LED indicatorPoE/LAN,LED1,LED2,LED3
Power Method24V0.5A Passive PoE
Lightning Protection6000V
Passive PoE power supplyPassive power over ethenet via PoE/LAN ( 4,5pins
-7,8pins)
Voltage range: 21-25V DC
Reception SensitivityMCS0: -96dbm
MCS7: -72dbm
Operating ModeAP/Station/WISP/P2MP/WDS Repeater/Router
Enable/Disable Wireless RadioSupport
SSID HiddenSupport
SSID IsolationSupport
Channel10/20/30/40MHz
Client Limitation For SSIDSupport
Wireless Access ControlSupport
Weak Signal Client LimitationSupport
Transmit PowerAdjustable power by 1dBm
WMM CapableSupport
APSD CapableSupport
Wireless Security64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
Transparent BridgeSupport
VLAN Tagging for SSIDSupport
DHCP ServerSupport
VPN Pass-throughPPTP,L2TP
Schedule RebootSupport
Page TimeoutSupport
Ping WatchdogSupport
Dynamic DNSnoip, dyndns.org
Network DiagnosesPing, Traceroute, Signal Scan
Time&Date SettingSupport
Firmware UpgradeSupport
Backup/Restore ConfigurationSupport
Username ManagermentSupport
SyslogSupport
Managed By ControllerPC Software — CPE Assistant
Package Content15GHz 11N 300Mbps Basestation
1PoE Power Adapter
1*Quick Installation Guide
TemperatureOperating Temperature:-30? ~ 60?
Storage Temperature:-40? ~ 70?
HumidityOperating Humidity: 10%~90% non-condensing
Storage Humidity: 10%~90% non-condensing
Default SettingsDefault login IP:192.168.2.1
Default Login Username:admin
Default Login Password:admin
CertificationFCC/CE/RoHS

What’s in the box
15GHz 11N 300Mbps Basestation
1PoE Power Adapter
1*Quick Installation Guide