Texas Instruments (SN74HC125N) Buffer, 74HC125, 2 V to 6 V, DIP-14

Product Overview
The SN74HC125N is a quadruple Bus Buffer Gate features independent line drivers with 3-state outputs. It is designed for 2 to 6V VCC operation. Each output is disabled when the associated output-enable (OE) input is high. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.
High-current 3-state outputs interface directly with system bus or can drive up to 15 LSTTL loads
80µA maximum ICC low power consumption
11ns typical Propagation delay (tpd)
±6mA Output drive at 5V
1µA maximum Low input current

Product Information
Logic Device Type: Buffer, Non Inverting
Logic Family / Base Number: 74HC125
Logic Case Style: DIP
No. of Pins: 14Pins
Supply Voltage Min: 2V
Supply Voltage Max: 6V
Logic IC Family: 74HC
Logic IC Base Number: 74125
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: –
Automotive Qualification Standard: –
MSL: –

What’s in the box
1 x Texas Instruments (SN74HC125N) Buffer