Torrenti Connection Kit For Tank 25mm

– The Tank Connector Kit fits seamlessly to your water tank to give you a pressurised water feed.

– It's a convenient, easy-to-operate all-in-one water connection kit unit that provides a water feed that is sufficient for simultaneous use.

– The Tank Connector Kit is the only DIY solution you need to convert the water supply from your tank to a pressurised pumping solution.

– 70 percent – 90 percent of all pump problems originate from the inlet side of a pump, usually due to pipe size and distances.

– Very often, mistakes made with installation are not immediately evident as damage to the mechanical seal happens over a period of time depending on the severity of the installation fault as well as the running hours of the pump.

– This pump connection kit eliminates any possible mistakes that could be made upon installation, therefore eliminating any future problems.

– Although this kit should never be installed on a pump that has an inlet larger than 25mm, the large majority of pressure pumps have a 25mm inlet.

– Due to the kit being able to be installed by almost anyone, it eliminates the need for a qualified professional, therefore limiting the expenses associated with installation.

– The design of the kit also makes use of only the needed material, also limiting costs.

What’s in the box
1 x 400mm Yellow suction hose
2 x Camlock type c female coupler
2 x Pvc ball valve 25mm
1 x Reducing bush
1 x Barrel nipple
2 x Camlock type f male adaptor
1 x Galv elbow male/female 25mm