Victron BlueSolar Charger Controller MPPT 100/20

Victron BlueSolar MPPT 100/20

ALL BLUESOLAR DEVICES DO NOT HAVE BLUETOOTH.

Solar charge controller:

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

MPPT: Ultra Fast Maximum Power Point Tracking:

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control:

Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.

Load output:

The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which BlueSolar disconnects a load thereby preventing excessive drain on your batteries. And here's the clever bit: BlueSolar will attempt a 100% recharge every day. If it can't during periods of poor weather it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.

Features:.

Ultra-fast Maximum Power Point Tracking (MPPT).

Advanced Maximum Power Point Detection in case of partial shading conditions.

Outstanding conversion efficiency.

Natural convection cooling.

Automatic battery voltage recognition.

Flexible charge algorithm.

Over temperature protection and power derating when temperature is high.

Specifications:

Battery voltage (auto select): 12/24/48V.

Rated charge current: 20A.

Nominal PV power, 12V 1a,b): 290W.

Nominal PV power, 24V 1a,b): 580W.

Nominal PV power, 48V 1a,b): 1160W.

Max. PV short circuit current 2): 20A.

Automatic load disconnect: Yes.

Max. PV open circuit voltage: 100V.

Peak efficiency: 98%.

Self-consumption – load on: 26 / 20 / 19 mA.

Self-consumption – load off: 10 / 8 / 7 mA.

Charge voltage 'absorption': 14,4V / 28,8V / 57,6V (adj.).

Charge voltage 'float': 13,8V / 27,6V / 55,2V (adj.)

Charge algorithm: multi-stage adaptive.

Temperature compensation: -16 mV / C resp. -32 mV / C.

Max. continuous load current: 20A / 20A / 1A.

Low voltage load disconnect: 11,1V / 22,2V / 44,4V or 11,8V / 23,6V / 47,2V or Battery Life algorithm.

Low voltage load reconnect: 13,1V / 26,2V / 52,4V or 14V / 28V / 56V or Battery Life algorithm.

Protection: Output short circuit / Over temperature.

Operating temperature: -30 to +60 C (full rated output up to 40 C).

Humidity: 95%, non-condensing.

Data communication port: VE.Direct.

What’s in the box
1 x Victron BlueSolar Charger Controller MPPT 100/20