Victron Pure Sinewave Phoenix Inverter 12|500

Inverters allow you to power domestic equipment – requiring 230V AC – using 'leisure' or 'automotive' batteries rated at 12V DC.

Proven reliability:

The full bridge plus toroidal transformer topology has proven its reliability over many years.

The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power:

Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools.

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset

value (min load: 15W).

Once in standby, the inverter will switch on for a short period (adjustable,

default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off:

A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector.

Specifications

– Cont. power at 25 degrees celsius: 400W

– Peak power: 900W

– Output AC voltage / frequency: 230VAC +/- 3%, 50Hz +/- 0,1%

– Input voltage range: 9,2 – 17V

– DC low shut down 9.3V

– Max. efficiency: 90%

– Zero-load power: 6W

– Maximum cable cross-section: 10mm squared

– Standard AC outlet: IEC-320 (male plug included)

– Protection category: IP 21

What’s in the box
1 x Victron Energy Phoenix Inverter VE.Direct 12|800
1 x IEC-320 Male Plug