Wireless RF Remote Control Switch & Receiver Set 10A DC 12V 433MHz

Features:
Easy to install and easy to carry
With a slidable cover on the remote control
With a hook on the remote control
Use Learning coding, stable and reliable
The wireless signal can pass through walls, floors and doors
You can turn on or turn off the receiver with a transmitter (remote control) from any place within a reliable distance
Operating Voltage: DC12V
Maximum Load: 10A
Operating Frequency: 433MHz (in the set)
Receiver Sensitivity: -100dBm
Encoding Type: learning code
Board Size: Approx. 5.3×3.1cm/ 2.09×1.22″
Remote control distance: about 100 meters in the air, 30-50 meters in the city (depending on the actual situation, the closer the space is, the closer the distance is.

Output Working Way:
Jog: Pressing one button is working. Losing your finger on the same button is a stop. (need one channel switch and one button remote control)
Self-lock: Pressing one button one time is working. Pressing the same button again is stop (need one channel switch and one button remote control)
Inter-lock: Pressing one button is working. Pressing another button stop (need one channel switch and 2 buttons for remote control)
Please notice that there is 1CH and 1 button wireless remote control. You can choose the self-lock or jog working/ output way, you better choose jog or self-lock, so pressing the button is open, and pressing again is close, or pressing is open, and losing a finger is close

Learning and Remove Method:
Press the learning code. The indicator from on to off, loosen your finger, press any button on the remote control, and the indicator flash 2 times and off. It means you learn it successfully
It can learn more than 12 PCS 2262 or 1527 chips with the different code wireless remote control
Remove/ Clean: Press the learning button about 8 seconds, and the indicator turn on to off, which means the information that you keep has been removed successfully

What’s in the box
1 x Learning Code Receiver
1 x Remote Control