Features:
This wood flooring tool set is a combination of floor installation tools, including 1 x rubber hammer, 1 x tapping block, 1 x pull bar and 40 x spacers, which allows you install composite wood floor more easily.
1.Use the pull bar to eliminate gaps on the long side of the planks. 2.Insert the tapping block into the tongue of the plank when tapping two planks together. 3.Adjust the thickness of the gap using two spacers – make sure to place the spacers on the edges, leaving enough room for expansion if needed. 4.Use the mallet to hammer the tapping block to eliminate gaps between planks.
Rubber Hammer: The hammer included is great for tapping down the end seams for a perfect lock.There is a groove in the block that fits the tongue perfectly and is much faster than locking and unlocking a scrap piece of flooring.
Pull Bar:The end piece pull bar has two felt pads on the bottom side that sits on the flooring to help prevent scratches,works great when reaching the end of the row to seat all the floor boards into each other tightly. Just slip the shorter edge against the wall on either side and hammer it from both sides to ensure they are connected.
40 Piece Spacers:The spacers can stack and stagger the spacers to create different thicknesses.They are tapered, just put two together and adjust to any width,following the instructions and you will have no issues to install vinyl flooring.
Specifications:
Material: Rubber+Carbon Steel+Plastic
Product Weight: 1500g
Note:
Size may be a little deviation due to manual measurement.
Only Wood Flooring Installation Kit, Other items shown on photos are NOT included.
Different displays show the same picture may be slightly differences.
What’s in the box
1 x Rubber Hammer
1 x Tapping Block
1 x Pull Bar
40 x Spacers
1 x Manual
Reviews
There are no reviews yet.