XDP160B 24 Volt High-Pressure Diaphragm Pump

XDP160B High Pressure 24 volt DC Diaphragm Water Pump
Power supply: 24 volt DC
Max Flow – 5,5 L/min. (1,5GPH)
Max Pressure – 11 bar pressure. (160psi)
Amps – 4,5 amp version.
Recommended fuse size: 5 amps
Self-priming pumps up to 1,5 meter
Controlled by an auto pressure switch
XDP pump comes with a 3/8’’(10mm) hose barb connection to 10mm ID male.
Automatic flow controller
XDP HIGH-pressure pumps are perfect for portable car wash machines, carpet cleaning machines, sweepers and agriculture sprayers and patio misting systems, and general mobile water transfer. etc

XDP high-pressure diaphragm pump, and can run dry without damaging the motor.

Caution:
Intermittent use only – 30 minutes ON and 20 minutes OFF. It needs to cool down to ambient temperature.
Frequent start/stop cycling should be avoided
A possible reason for causing failure – Leaks on the system will cause the pump to cycle, this leads to the failure of the Pressure Switch. Examples: poor connection, Gardena fittings, Ball valve, or taps not shutting off properly.
Low voltage forces the pump to run continuously and not reach the cut-off pressure of 2.4 bar, resulting in the motor burning out.

Warning: High resistance of these pumps will lead to burning out of the brush pump if used continuously.

XDP series designed based on three diaphragms.

Pump pressure 160PSi (11 bar) with self-priming ability.

DP High-Pressure wash pumps use Viton seals widely for liquid PH value vary between 4-11PH.

Note: Because of the high pressure, clamps should be used to secure tubing.
Rubber feet fitted for noise and vibration reduction.

Small, Portable & lightweight.

Mount in a vertical position and use a flexible high-pressure hose.

Shaft made of Stainless steel for heavy-duty pressure.

Beware to avoid kinking pipes.

Not for pumping flammable liquids.

What’s in the box
1x Pump
1x Fittings