Zimbos Envirolife Matt 1 Component Water based Varnish – No primer required

Sets new standards in the Zimbos range:

Water-based 1-component finish for wooden floors. For normal wear. Elastic, stable properties.

• Good price / performance ratio
• Balanced properties
• High filling capacity
• Easy and safe application

Range of use:

Suitable for parquet and wooden floors

Gloss level approx.x 21
Solids 30 2%
Viscosity DIN 4 19 2s
Storage and transportation 12 months of storage stability.
GISCODE W2+
This product contains max. 49 g/l VOC.

• The degree of gloss is measured at 60 on glass. It depends on the layer thickness and ambient conditions (temp., rel. humidity) during the drying process. The values are intended merely as a guide.

Application

The surface must be professionally sanded.
The floor must be dry and free of any old coatings, oil, grease, wax, silicone, sanding dust and other impurities.
The optimal processing conditions are room temperature +15 C to + 25 C, floor temperature +15 C to+22 C, rel. humidity 40% – 75%, material temperature +18 C – + 25 C, max. wood moisture 12%, sufficiently ventilate working rooms.
In order to prevent parquet damage, the room temperature should be set to the annual average expect ed for the use of the product.
Transfer material to a bucket before applying.

Shake the contents well.

Observe general and, if necessary, product-specific occupational health and safety regulations.

Three coats of Zimbos Envirolife is required.

Application tool / application rate
Recommended roller 120 / 100-120 ml(g)/m = 8-10m /l(kg)
Intermediate sanding
Able to recoat without intermediate sanding within the first 24 hours. After this time, an intermediate sanding is necessary. An intermediate sanding before the last application will improve the optical apearance of the surface. Use a perforated pad P120 or finer, alternatively Sanding Net P120 or finer. Carefully remove dust before overcoating
Drying time
– Can be carefully walked on, intermediate sanding can be performed and can be varnished over after no less than 4 hours.
– Light use after 24 hours.
– Full use and covering possible after 5 days.
– Drying times are valid for +20 C and 50% relative humidity.

Use on parquet and hardwood floors:
– Apply by roller.
– Dry.
– Intermediate sanding.
– Apply second coating layer by roller.
Use on parquet and hardwood floors:
Only with rigid bonding for wood species oak, ash, maple and light beech. For moisture-sensitive woods, parquet on underfloor heating and in restoration cases we recommend only applying only one coat of finish per day.
– Prepare the substrate professionally.
– Roll on Envirolife.
– Drying.
– Roll on a second layer of Envirolife.
– Drying.
-Intermediate sanding.
– Roll on a final layer of Envirolife.

What’s in the box
1 x 5kg Plastic Zimbos Envirolife Container