15mm ASM PVC Water Meter

15mm ASM PVC Water Meter (3/4″ bsp threaded)

Application:
– Measures the volume of clean, cold water passing through a pipeline.
– Domestic billing purposes.

Features:
– Plastic shell of solid and robust design for long service life.
– Corrosion resistance, UV Stabilised, fibreglass reinforced polymer plastic.
– Optimum accuracy and performance in any position (horizontal or vertical).
– Grooved rotary piston.
– Clear, easily read, liquid sealed 8 digit counter.
– Measuring accuracy approved to SANS 1529-1.
– Internal Non-Return Valve and Strainer.
– Each meter has a unique serial number.
– Pulse prepared.
– Inlet and Outlet threads compatible with ISO metric sizes.

Maximum Permissible Errors:
– In the lower zone from qmin inclusive up to but excluding qt is ± 5%.
– In the upper zone from qt inclusive up to and including qs is ± 2%.

Working Conditions:
– Working temperature: 2° C ~ 40 °C.
– Nominal pressure: 1600 kPa (16 Bar).
– Maximum test pressure: 4800 kPa (48 Bar).

Compliance Standard:
– Conforms to SANS 1529-1:2006 (Class C).
– Conforms to ISO4064: Class C.

Installation Requirements:
– May be installed on a horizontal or vertical pipeline.
– Pipeline must be flushed before installation.
– Meters should be constantly full of water during operation.

Important Notice:
– Meter to be used with plastic Tailpieces/Connectors.
– No Hemp to be used during installation.
– No soldering or heat to be applied during installation.
– All plastic meters to be installed in Plastic Water Meter boxes to prevent UV deterioration.