AfriqWater In-line Y-Type +PLUS Disc Filter 50mm

Filters can extend the life of your garden and farming irrigation system, by years. It’s essential for both dripline and sprinkler systems, especially if you irrigate out of a dam or river.

Even if the irrigation system can handle a grain of sand without clogging, removing that sand grain is still advantageous as it will eliminate the daily wear-and-tear of sharp granules rubbing against the inside of your irrigation system as water flushes through.

While sand and other particles, such as pieces of debris, is probably the most obvious thing that needs to be filtered out of the water, organic materials can be just as important to remove. Algae is one of the big culprits of clogged irrigation systems, and once it enters your systems, it can slowly grow and spread on the inside.

Disc filters are especially efficient in the removal and filtration of algae.

Connection type: BSPT X BSPT
Inlet/outlet diameter: 50mm
Flow rate: 25m?/hour
Cartridge type: Disc
Filtration surface: 559,20cm²
Micron/mesh: 130micron / 120 mesh
Pressure: 8 BAR

To install a filter or filters into an existing irrigation system is a piece of cake! Your filter can be inserted on any line, at any stage, between the sprinklers or dripline and the water source.

You need to regularly clean your filter, too. To get rid of any gunk that builds up, you need to regularly check to see if your filter needs a cleaning, and if it does, you can simply:
– Remove the top of the filter casing,
– Unscrew the filter and pop it out,
– Thoroughly wash your filter with water, without any soaps or chemicals as this might damage your filter,
– Put your filter back together by simply screwing it back into place.

Happy gardening!

What’s in the box
1x In-line Y-Type +PLUS Disc Filter 50mm