Clearline Loadshedding Appliance Tripconnect Lightning & Surge Protector

Appliance Tripconnect

The power line series 12-00603
– Economical protection
– Status monitoring
– Automatic operation
– Reduces in rush current
– Built-in delay
There are many instances in areas where the quality of supply is unpredictable. Even when UPS equipment is installed, large fluctuations in supply voltage can damage electronic equipment. Power protection devices used at home, office and work-place such as surge suppressors and stabilizers provide protection against power spikes that happens in milliseconds, mainly caused by lightning.

The tripconnect prevents damage from power surges and dips (brownouts) caused by power shutdowns and over- and under-voltages from unstable power. The duration of these conditions is normally longer and can be especially damaging to air conditioners, electric motors, etc., running under load, and expensive electronic equipment.

The trip connect unit will simply remove power from the equipment in the event of over or under voltage conditions and automatically restore power when the supply falls below acceptable limits. Surge protection and status monitoring has been included. The single phase unit is simply inserted between the wall socket and the equipment power plug. Zero voltage switch-on has been included for smooth rev_2

Features:
Dimension:
60 mm
100 mm
50 mm
84 mm

Specification:
Power
Max load current
Low voltage trip limit
Low voltage connect
High voltage trip limit
High voltage connect
No of cycles to trip
Max discharge current Ismax (8/20)
Residual voltage @ Ismax (Up)
Response time
Indication LED
Delay time
Standards compliance

Nom. input voltage
16A
180V
190V
260V
250V
1-3
8kA L-N, L-E, N-E
<900V
<25ns

Power Available, Delay Active & Protected when Lit
10 seconds
IEC 99.4, ANSI C62.42
230VAC 50Hz
Power Available – ON
Delay Active – OFF – delay timed out
Protected When LIT – OFF – Surge protector faulty, check protector

Power Available – OFF – No power to Surge protector
Delay Active – OFF
Protected When LIT – OFF (No output)
4 Power Available – ON
Delay Active – Flashes twice every 3 second – High voltage
Protected When LIT – OFF (No output)

Power Available – ON
Delay Active – Flashes once every 3 second – Low voltage
Protected When LIT – OFF (No output)
Power Available – ON
Delay Active – 10 second delay is activated
Protected When LIT – OFF (No output)

Power Available – ON
Delay Active – OFF – delay timed out
Protected When LIT – Normal operation. Power connected to equipment

Upon power-up, a delay will be initiated, after which the power will be connected to the equipment.
Should the supply voltage exceed the upper or lower limits, the power will be disconnected from the
equipment. When the supply voltage returns to within the limits, the same delay will be initiated, after which the power will be connected to the equipment.

Designed and Manufactured by:
Clearline Protection Systems (Pty) Ltd
Power
Available
Delay
Active
Protected
When LITÂ’
Led status
Indication
Status Indication
Three LEDÂ’s are provided to show the status of the protector. Below is an explanation of the expected

LED Configurations.
Normal operation
Delay mode (wait)
Low voltage
High voltage
No power
Protector faulty

What’s in the box
Clearline Loadshedding Appliance Tripconnect Lightning & Surge Protector