Switchmatic Electronic Pressure Switch

SWITCHMATIC 1 is an electronic pressure switch with an integrated digital pressure gauge. It can manage the start and stop of single-phase electric pumps up to 3 HP (2,2 kW). Cut-in and cut-out pressure implementation can be set easily and accurately through the user-friendly control panel. Wiring is carried out identically to a conventional electromechanical switch.

OPERATING CHARACTERISTICS
ART function (Automatic Reset Test). If the device has been stopped due to the action of the safety system against dry operation, the ART tries to connect the pump, with a programmed periodicity because the water supply could have been restored (only type SWITCHMATIC 2).
Sleep mode with low power consumption.
Inner pressure transmitter.
Integrated pressure gauge with bar and psi instantaneous display.
User-friendly control panel with 3-digit display, led-lights and pushbuttons.
EMC-certified and Electrical Safety certified.
For minimal pressure (for type Switchmatic 1).
Rapid-cycle alarm: when the hydropneumatic tank has lost the air and frequent start-stops are produced an alarm is activated (only type SWITCHMATIC 2).
Manual start.
RoHS and WEEE compliant.
Four operation modes:
– Differential.
– Inversed differential.
– Maximum pressure.
– Minimum pressure.
CONTROL PANEL
3 digits display:
– Operating mode: Instantaneous pressure
– Set mode: Cut in and cut out pressure.
Bar-psi led lights (green):
– Operating mode: Bright bar or psi.
– Pump on the Flashing bar or psi.
Star-Stop Led (yellow):
– Bright: displayed Pressure start or Pressure stop.
– Flashing: Setting Psart or Pstop
Push Buttons Up and down: Increase or decrease configuration parameters.
ENTER push-button:
– Manual start and stop
-Confirm configuration value.

What’s in the box
1x Switchmatic 1