Showing 1–12 of 17 results

  • Surge Protector 13mm 5KA

    0 out of 5
    $15.76

    Class 2 No. Poles 1P Imax 10kA In 8/20 5kA Up 1200V Uc 275V Un 230V Width 1 Module (13mm)

  • Surge Protector 13mm 15KA

    0 out of 5
    $16.57

    Class 2 No. Poles 1P Imax 30kA In 8/20 15kA Up 1200V Uc 275V Un 230V Width 1 Module (13mm)

  • Ubiquiti Ethernet Surge Protector

    0 out of 5
    $40.54

    Ubiquiti Networks ETH-SP-G2 Ethernet Surge Protector (Gen 2) Key Features Protects Outdoor PoE Devices ESD and Surge Protection Compatible with Gigabit Networks Two Ethernet Jacks The 2nd generation Ubiquiti Networks Ethernet Surge Protector safeguards your outdoor non-PoE and PoE-based systems from voltage threats such as surges and electrostatic discharge events, which can render an entire…

  • 600VDC Photovoltaic Surge Arrestor

    0 out of 5
    $40.62

    Solar SPD Type 2 for protection against voltage surges in Solar installations. BUD-40/2 Model BUD-40/2 Moulds 2 SPD according to EN 50539-11 Type 2 Open Voltage Uoc Max 600V Max. discharge current (8/20 s) [(DC+/DC-) -> PE] (Imax ) 40KA Nominal discharge current (8/20 s) [(DC+/DC-) -> PE] (In ) 20KA Voltage protection level Up…

  • Solar PV DC Surge Protection Device

    0 out of 5
    $34.04

    Used for surge protection purposes in electrical applications. Features: Din Rail Mount Fault Indication (Green OK / Red Failure) Specification: DC Surge Protection Device (SPD Type 2) 2-Pole 600V DC 40 kA Protective Elements: IP20 High Energy built in MOV Response Time: <25ns Operating Temperature Range: [-40o C to +70o C] Thermoplastic: Extinguishing Degree UL…

  • Fortis BNC CCTV Video Surge Protector

    0 out of 5
    $43.55

    – Ref: F252026 – Weight: 0.1Kg – Size (mm): 25H x 25W x 73L – Max Surge Current: 4KA – Lifespan: 300 attacks (100Amps) – BNC ConnectionsSuitable for protection for video signal of cctv surveillance system. What’s in the box BNC CCTV Video Surge Protector

  • Pentamark 4500DE Generator with Surge Plug

    0 out of 5
    $415.54

    Feautes: -Ignition/Automatic Start -Circuit breaker -Current overload protection -Engine switch -2 x Plug sockets -Volt meter Specifications: Rated voltage: 220 V Rate frequency: 50 Hz Rated output:: 2.5 kVa Max output: 2.7 kVa Tank size: 15 Litres Dimentions: 50cm x 35cm x 35cm Prestart Instructions: Pour oil into the generator before the first use. What’s…

  • Pentamark 950DC Generator with surge Adaptor

    0 out of 5
    $192.41

    AC Circuit Breaker Fuel Tank Capacity 4 Litre 2 Stroke, Reed Valve, Forced Air-cooled, Single Cylinder Displacement: 63cc 2 Stroke What’s in the box 1 x Pentamark 950DC Generator 1 x Surge Adaptor

  • Solar PV DC Surge Protection Device (3 Pole)

    0 out of 5
    $43.66

    Used for surge protection purposes in electrical applications. Features: Din Rail Mount Fault Indication (Green OK / Red Failure) Specification: DC Surge Protection Device (SPD Type 2) 3-Pole 1500V DC 40 kA Protective Elements: IP20 High Energy built in MOV Response Time: <25ns Operating Temperature Range: [-40o C to +70o C] Thermoplastic: Extinguishing Degree UL…

  • Delock Surge Protector 6kv Rj45 With Poe (62620)

    0 out of 5
    $89.29

    The RJ45 insulator by Delock protects a device from power surges on an attached network connection. The compact device supports Ethernet with 10/100/1000 Mb/s and Power over Ethernet. Specifications: – Connector: 1 x RJ45 jack (device) 1 x RJ45 jack (external) 1 x screw terminal for equipotential bonding – Data transfer rate up to 10/100/1000…

  • MikroTik Outdoor Gigabit Surge Protector with PoE

    0 out of 5
    $110.83

    MikroTik’s RB-GESP is an outdoor Gigabit Ethernet Surge Protector with a ground wire that supports Passive PoE and can be used to protect networks from lighting or surge damages. The unit comes with an IP67 outdoor enclosure and grounding cable. The maximum suggested cable length is 40 meters. For maximum protection, it is recommended to…

  • Allbro – PV Solar Combiner Brick with Surge Arrester

    0 out of 5
    $481.25

    A combiner box is a device that combines the output of multiple strings of PV modules for connection to the inverter. Using the Combiner Brick will make your installation look neat and the enclosure itself can last +25 years. Ideal for residential, commercial and light industrial systems. Features: – Made from GRP (Glass reinforced Polyester)…

End of content

End of content